#if HAVE_CRT
#define _CRTDBG_MAP_ALLOC
#include <stdlib.h>
#include <crtdbg.h>
#endif //HAVE_CRT
/*
*
* Based on the RFC 3174
*
* Full Copyright Statement
*
* Copyright (C) The Internet Society (2001). All Rights Reserved.
* Copyright (C) Mamadou Diop (2009)
*
* This document and translations of it may be copied and furnished to
* others, and derivative works that comment on or otherwise explain it
* or assist in its implementation may be prepared, copied, published
* and distributed, in whole or in part, without restriction of any
* kind, provided that the above copyright notice and this paragraph are
* included on all such copies and derivative works. However, this
* document itself may not be modified in any way, such as by removing
* the copyright notice or references to the Internet Society or other
* Internet organizations, except as needed for the purpose of
* developing Internet standards in which case the procedures for
* copyrights defined in the Internet Standards process must be
* followed, or as required to translate it into languages other than
* English.
*
* The limited permissions granted above are perpetual and will not be
* revoked by the Internet Society or its successors or assigns.
* This document and the information contained herein is provided on an
* "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
* TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
* BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
* HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
*
*
*
* Description:
* This file implements the Secure Hashing Algorithm 1 as
* defined in FIPS PUB 180-1 published April 17, 1995.
*
* The SHA-1, produces a 160-bit message digest for a given
* data stream. It should take about 2**n steps to find a
* message with the same digest as a given message and
* 2**(n/2) to find any two messages with the same digest,
* when n is the digest size in bits. Therefore, this
* algorithm can serve as a means of providing a
* "fingerprint" for a message.
*
* Portability Issues:
* SHA-1 is defined in terms of 32-bit "words". This code
* uses <stdint.h> (included via "sha1.h" to define 32 and 8
* bit unsigned integer types. If your C compiler does not
* support 32 bit unsigned integers, this code is not
* appropriate.
*
* Caveats:
* SHA-1 is designed to work with messages less than 2^64 bits
* long. Although SHA-1 allows a message digest to be generated
* for messages of any number of bits less than 2^64, this
* implementation only works with messages with a length that is
* a multiple of the size of an 8-bit character.
*
*/
/*
* Copyright (C) 2017, University of the Basque Country (UPV/EHU)
* Contact for licensing options: <licensing-mcpttclient(at)mcopenplatform(dot)com>
*
* The original file was part of Open Source Doubango Framework
* Copyright (C) 2010-2011 Mamadou Diop.
* Copyright (C) 2012 Doubango Telecom <http://doubango.org>
*
* This file is part of Open Source Doubango Framework.
*
* DOUBANGO is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* DOUBANGO is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with DOUBANGO.
*
*/
/**@file tsk_sha1.c
* @brief US Secure Hash Algorithm 1 (RFC 3174)
*
* @author Mamadou Diop <diopmamadou(at)doubango[dot]org>
*
*/
#include "tsk_sha1.h"
#include "tsk_string.h"
/**@defgroup tsk_sha1_group SHA1 (RFC 3174) utility functions.
* Copyright (C) The Internet Society (2001). All Rights Reserved.<br>
* Copyright (C) Mamadou Diop (2009)<br>
*
* This file implements the Secure Hashing Algorithm 1 as
* defined in FIPS PUB 180-1 published April 17, 1995.
*
* The SHA-1, produces a 160-bit message digest for a given
* data stream. It should take about 2**n steps to find a
* message with the same digest as a given message and
* 2**(n/2) to find any two messages with the same digest,
* when n is the digest size in bits. Therefore, this
* algorithm can serve as a means of providing a
* "fingerprint" for a message.
*
*/
/**@ingroup tsk_sha1_group
* Define the SHA1 circular left shift macro
*/
#define SHA1CircularShift(bits,word) \
(((word) << (bits)) | ((word) >> (32-(bits))))
/* Local Function Prototyptes */
void SHA1PadMessage(tsk_sha1context_t *);
void SHA1ProcessMessageBlock(tsk_sha1context_t *);
/**@ingroup tsk_sha1_group
*
* This function will initialize the @a context in preparation
* for computing a new SHA1 message digest.
*
*@param context The context to reset.
*
*@retval @ref tsk_sha1_errcode_t code.
*/
tsk_sha1_errcode_t tsk_sha1reset(tsk_sha1context_t *context)
{
if (!context){
return shaNull;
}
context->Length_Low = 0;
context->Length_High = 0;
context->Message_Block_Index = 0;
context->Intermediate_Hash[0] = 0x67452301;
context->Intermediate_Hash[1] = 0xEFCDAB89;
context->Intermediate_Hash[2] = 0x98BADCFE;
context->Intermediate_Hash[3] = 0x10325476;
context->Intermediate_Hash[4] = 0xC3D2E1F0;
context->Computed = 0;
context->Corrupted = 0;
return shaSuccess;
}
/**@ingroup tsk_sha1_group
* This function will return the 160-bit message digest into the
* Message_Digest array provided by the caller.
* NOTE: The first octet of hash is stored in the 0th element,
* the last octet of hash in the 19th element.
* @param context The @a context to use to calculate the SHA-1 hash.
* @param Message_Digest A pointer the the sha1 digest result.
* @retval @ref tsk_sha1_errcode_t code.
*/
tsk_sha1_errcode_t tsk_sha1result( tsk_sha1context_t *context, tsk_sha1digest_t Message_Digest)
{
int32_t i;
if (!context || !Message_Digest){
return shaNull;
}
if (context->Corrupted){
return (tsk_sha1_errcode_t)context->Corrupted;
}
if (!context->Computed){
SHA1PadMessage(context);
for(i=0; i<64; ++i){
/* message may be sensitive, clear it out */
context->Message_Block[i] = 0;
}
context->Length_Low = 0; /* and clear length */
context->Length_High = 0;
context->Computed = 1;
}
for(i = 0; i < TSK_SHA1_DIGEST_SIZE; ++i){
Message_Digest[i] = context->Intermediate_Hash[i>>2]
>> 8 * ( 3 - ( i & 0x03 ) );
}
return shaSuccess;
}
/**@ingroup tsk_sha1_group
*
* This function accepts an array of octets as the next portion of the message.
*
* @param context The sha1 context.
* @param message_array An array of characters representing the next portion of the message.
* @param length The @a length of the message in message_array
* @retval @ref tsk_sha1_errcode_t code.
*/
tsk_sha1_errcode_t tsk_sha1input(tsk_sha1context_t *context,
const uint8_t *message_array,
unsigned length)
{
if (!length){
return shaSuccess;
}
if (!context || !message_array){
return shaNull;
}
if (context->Computed){
context->Corrupted = shaStateError;
return shaStateError;
}
if (context->Corrupted){
return (tsk_sha1_errcode_t)context->Corrupted;
}
while(length-- && !context->Corrupted)
{
context->Message_Block[context->Message_Block_Index++] =
(*message_array & 0xFF);
context->Length_Low += 8;
if (context->Length_Low == 0){
context->Length_High++;
if (context->Length_High == 0)
{
/* Message is too long */
context->Corrupted = 1;
}
}
if (context->Message_Block_Index == 64){
SHA1ProcessMessageBlock(context);
}
message_array++;
}
return shaSuccess;
}
/**@ingroup tsk_sha1_group
*
* This function will process the next 512 bits of the message
* stored in the Message_Block array.
*
* @param context The sha1 context.
*
*/
void SHA1ProcessMessageBlock(tsk_sha1context_t *context)
{
/*
* Many of the variable names in this code, especially the
* single character names, were used because those were the
* names used in the publication.
*/
const uint32_t K[] = { /* Constants defined in SHA-1 */
0x5A827999,
0x6ED9EBA1,
0x8F1BBCDC,
0xCA62C1D6
};
int32_t t; /* Loop counter */
uint32_t temp; /* Temporary word value */
uint32_t W[80]; /* Word sequence */
uint32_t A, B, C, D, E; /* Word buffers */
/*
* Initialize the first 16 words in the array W
*/
for(t = 0; t < 16; t++){
W[t] = context->Message_Block[t * 4] << 24;
W[t] |= context->Message_Block[t * 4 + 1] << 16;
W[t] |= context->Message_Block[t * 4 + 2] << 8;
W[t] |= context->Message_Block[t * 4 + 3];
}
for(t = 16; t < 80; t++){
W[t] = SHA1CircularShift(1,W[t-3] ^ W[t-8] ^ W[t-14] ^ W[t-16]);
}
A = context->Intermediate_Hash[0];
B = context->Intermediate_Hash[1];
C = context->Intermediate_Hash[2];
D = context->Intermediate_Hash[3];
E = context->Intermediate_Hash[4];
for(t = 0; t < 20; t++){
temp = SHA1CircularShift(5,A) +
((B & C) | ((~B) & D)) + E + W[t] + K[0];
E = D;
D = C;
C = SHA1CircularShift(30,B);
B = A;
A = temp;
}
for(t = 20; t < 40; t++){
temp = SHA1CircularShift(5,A) + (B ^ C ^ D) + E + W[t] + K[1];
E = D;
D = C;
C = SHA1CircularShift(30,B);
B = A;
A = temp;
}
for(t = 40; t < 60; t++){
temp = SHA1CircularShift(5,A) +
((B & C) | (B & D) | (C & D)) + E + W[t] + K[2];
E = D;
D = C;
C = SHA1CircularShift(30,B);
B = A;
A = temp;
}
for(t = 60; t < 80; t++){
temp = SHA1CircularShift(5,A) + (B ^ C ^ D) + E + W[t] + K[3];
E = D;
D = C;
C = SHA1CircularShift(30,B);
B = A;
A = temp;
}
context->Intermediate_Hash[0] += A;
context->Intermediate_Hash[1] += B;
context->Intermediate_Hash[2] += C;
context->Intermediate_Hash[3] += D;
context->Intermediate_Hash[4] += E;
context->Message_Block_Index = 0;
}
/**@ingroup tsk_sha1_group
*
* According to the standard, the message must be padded to an even
* 512 bits. The first padding bit must be a '1'. The last 64
* bits represent the length of the original message. All bits in
* between should be 0. This function will pad the message
* according to those rules by filling the Message_Block array
* accordingly. It will also call the ProcessMessageBlock function
* provided appropriately. When it returns, it can be assumed that
* the message digest has been computed.
*
* @param context The sha1 context.
*
*/
void SHA1PadMessage(tsk_sha1context_t *context)
{
/*
* Check to see if the current message block is too small to hold
* the initial padding bits and length. If so, we will pad the
* block, process it, and then continue padding into a second
* block.
*/
if (context->Message_Block_Index > 55){
context->Message_Block[context->Message_Block_Index++] = 0x80;
while(context->Message_Block_Index < 64){
context->Message_Block[context->Message_Block_Index++] = 0;
}
SHA1ProcessMessageBlock(context);
while(context->Message_Block_Index < 56){
context->Message_Block[context->Message_Block_Index++] = 0;
}
}
else{
context->Message_Block[context->Message_Block_Index++] = 0x80;
while(context->Message_Block_Index < 56){
context->Message_Block[context->Message_Block_Index++] = 0;
}
}
/*
* Store the message length as the last 8 octets
*/
context->Message_Block[56] = context->Length_High >> 24;
context->Message_Block[57] = context->Length_High >> 16;
context->Message_Block[58] = context->Length_High >> 8;
context->Message_Block[59] = context->Length_High;
context->Message_Block[60] = context->Length_Low >> 24;
context->Message_Block[61] = context->Length_Low >> 16;
context->Message_Block[62] = context->Length_Low >> 8;
context->Message_Block[63] = context->Length_Low;
SHA1ProcessMessageBlock(context);
}
/**@ingroup tsk_sha1_group
* Computes the sha1 digest result.
* @param Message_Digest A pointer to the sha1 digest result.
* @param context The sha1 context.
*/
void tsk_sha1final(uint8_t *Message_Digest, tsk_sha1context_t *context)
{
int32_t i;
SHA1PadMessage(context);
for(i = 0; i<64; ++i) {
context->Message_Block[i] = 0;
}
context->Length_Low = 0; /* and clear length */
context->Length_High = 0;
for(i = 0; i < TSK_SHA1_DIGEST_SIZE; ++i) {
Message_Digest[i] = context->Intermediate_Hash[i>>2] >> 8*(3-(i&0x03));
}
}
/**@ingroup tsk_sha1_group
* Calculates sha1 digest result (hexadecimal string).
*
* @param input The input data for which to calculate the SHA-1 hash.
* @param size The size of the input data.
* @param result SHA-1 hash result as a hexadecimal string.
*
* @retval @ref tsk_sha1_errcode_t code.
* @sa @ref TSK_SHA1_DIGEST_CALC
**/
tsk_sha1_errcode_t tsk_sha1compute(const char* input, tsk_size_t size, tsk_sha1string_t *result)
{
tsk_sha1_errcode_t ret;
tsk_sha1context_t sha;
uint8_t digest[TSK_SHA1_DIGEST_SIZE];
(*result)[TSK_SHA1_STRING_SIZE] = '\0';
if( (ret = tsk_sha1reset(&sha)) != shaSuccess ){
return ret;
}
else if ( (ret = tsk_sha1input(&sha, (uint8_t*)input, (unsigned int)size)) != shaSuccess ){
return ret;
}
else if( (ret = tsk_sha1result(&sha, digest)) != shaSuccess ){
return ret;
}
tsk_str_from_hex(digest, TSK_SHA1_DIGEST_SIZE, (char*)*result);
return shaSuccess;
}