/*
* Copyright (c) 2012 The WebRTC project authors. All Rights Reserved.
*
* Use of this source code is governed by a BSD-style license
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
* in the file PATENTS. All contributing project authors may
* be found in the AUTHORS file in the root of the source tree.
*/
#ifndef WEBRTC_MODULES_AUDIO_PROCESSING_AGC_INCLUDE_GAIN_CONTROL_H_
#define WEBRTC_MODULES_AUDIO_PROCESSING_AGC_INCLUDE_GAIN_CONTROL_H_
#include "typedefs.h"
// Errors
#define AGC_UNSPECIFIED_ERROR 18000
#define AGC_UNSUPPORTED_FUNCTION_ERROR 18001
#define AGC_UNINITIALIZED_ERROR 18002
#define AGC_NULL_POINTER_ERROR 18003
#define AGC_BAD_PARAMETER_ERROR 18004
// Warnings
#define AGC_BAD_PARAMETER_WARNING 18050
enum
{
kAgcModeUnchanged,
kAgcModeAdaptiveAnalog,
kAgcModeAdaptiveDigital,
kAgcModeFixedDigital
};
enum
{
kAgcFalse = 0,
kAgcTrue
};
typedef struct
{
WebRtc_Word16 targetLevelDbfs; // default 3 (-3 dBOv)
WebRtc_Word16 compressionGaindB; // default 9 dB
WebRtc_UWord8 limiterEnable; // default kAgcTrue (on)
} WebRtcAgc_config_t;
#if defined(__cplusplus)
extern "C"
{
#endif
/*
* This function processes a 10/20ms frame of far-end speech to determine
* if there is active speech. Far-end speech length can be either 10ms or
* 20ms. The length of the input speech vector must be given in samples
* (80/160 when FS=8000, and 160/320 when FS=16000 or FS=32000).
*
* Input:
* - agcInst : AGC instance.
* - inFar : Far-end input speech vector (10 or 20ms)
* - samples : Number of samples in input vector
*
* Return value:
* : 0 - Normal operation.
* : -1 - Error
*/
int WebRtcAgc_AddFarend(void* agcInst,
const WebRtc_Word16* inFar,
WebRtc_Word16 samples);
/*
* This function processes a 10/20ms frame of microphone speech to determine
* if there is active speech. Microphone speech length can be either 10ms or
* 20ms. The length of the input speech vector must be given in samples
* (80/160 when FS=8000, and 160/320 when FS=16000 or FS=32000). For very low
* input levels, the input signal is increased in level by multiplying and
* overwriting the samples in inMic[].
*
* This function should be called before any further processing of the
* near-end microphone signal.
*
* Input:
* - agcInst : AGC instance.
* - inMic : Microphone input speech vector (10 or 20 ms) for
* L band
* - inMic_H : Microphone input speech vector (10 or 20 ms) for
* H band
* - samples : Number of samples in input vector
*
* Return value:
* : 0 - Normal operation.
* : -1 - Error
*/
int WebRtcAgc_AddMic(void* agcInst,
WebRtc_Word16* inMic,
WebRtc_Word16* inMic_H,
WebRtc_Word16 samples);
/*
* This function replaces the analog microphone with a virtual one.
* It is a digital gain applied to the input signal and is used in the
* agcAdaptiveDigital mode where no microphone level is adjustable.
* Microphone speech length can be either 10ms or 20ms. The length of the
* input speech vector must be given in samples (80/160 when FS=8000, and
* 160/320 when FS=16000 or FS=32000).
*
* Input:
* - agcInst : AGC instance.
* - inMic : Microphone input speech vector for (10 or 20 ms)
* L band
* - inMic_H : Microphone input speech vector for (10 or 20 ms)
* H band
* - samples : Number of samples in input vector
* - micLevelIn : Input level of microphone (static)
*
* Output:
* - inMic : Microphone output after processing (L band)
* - inMic_H : Microphone output after processing (H band)
* - micLevelOut : Adjusted microphone level after processing
*
* Return value:
* : 0 - Normal operation.
* : -1 - Error
*/
int WebRtcAgc_VirtualMic(void* agcInst,
WebRtc_Word16* inMic,
WebRtc_Word16* inMic_H,
WebRtc_Word16 samples,
WebRtc_Word32 micLevelIn,
WebRtc_Word32* micLevelOut);
/*
* This function processes a 10/20ms frame and adjusts (normalizes) the gain
* both analog and digitally. The gain adjustments are done only during
* active periods of speech. The input speech length can be either 10ms or
* 20ms and the output is of the same length. The length of the speech
* vectors must be given in samples (80/160 when FS=8000, and 160/320 when
* FS=16000 or FS=32000). The echo parameter can be used to ensure the AGC will
* not adjust upward in the presence of echo.
*
* This function should be called after processing the near-end microphone
* signal, in any case after any echo cancellation.
*
* Input:
* - agcInst : AGC instance
* - inNear : Near-end input speech vector (10 or 20 ms) for
* L band
* - inNear_H : Near-end input speech vector (10 or 20 ms) for
* H band
* - samples : Number of samples in input/output vector
* - inMicLevel : Current microphone volume level
* - echo : Set to 0 if the signal passed to add_mic is
* almost certainly free of echo; otherwise set
* to 1. If you have no information regarding echo
* set to 0.
*
* Output:
* - outMicLevel : Adjusted microphone volume level
* - out : Gain-adjusted near-end speech vector (L band)
* : May be the same vector as the input.
* - out_H : Gain-adjusted near-end speech vector (H band)
* - saturationWarning : A returned value of 1 indicates a saturation event
* has occurred and the volume cannot be further
* reduced. Otherwise will be set to 0.
*
* Return value:
* : 0 - Normal operation.
* : -1 - Error
*/
int WebRtcAgc_Process(void* agcInst,
const WebRtc_Word16* inNear,
const WebRtc_Word16* inNear_H,
WebRtc_Word16 samples,
WebRtc_Word16* out,
WebRtc_Word16* out_H,
WebRtc_Word32 inMicLevel,
WebRtc_Word32* outMicLevel,
WebRtc_Word16 echo,
WebRtc_UWord8* saturationWarning);
/*
* This function sets the config parameters (targetLevelDbfs,
* compressionGaindB and limiterEnable).
*
* Input:
* - agcInst : AGC instance
* - config : config struct
*
* Output:
*
* Return value:
* : 0 - Normal operation.
* : -1 - Error
*/
int WebRtcAgc_set_config(void* agcInst, WebRtcAgc_config_t config);
/*
* This function returns the config parameters (targetLevelDbfs,
* compressionGaindB and limiterEnable).
*
* Input:
* - agcInst : AGC instance
*
* Output:
* - config : config struct
*
* Return value:
* : 0 - Normal operation.
* : -1 - Error
*/
int WebRtcAgc_get_config(void* agcInst, WebRtcAgc_config_t* config);
/*
* This function creates an AGC instance, which will contain the state
* information for one (duplex) channel.
*
* Return value : AGC instance if successful
* : 0 (i.e., a NULL pointer) if unsuccessful
*/
int WebRtcAgc_Create(void **agcInst);
/*
* This function frees the AGC instance created at the beginning.
*
* Input:
* - agcInst : AGC instance.
*
* Return value : 0 - Ok
* -1 - Error
*/
int WebRtcAgc_Free(void *agcInst);
/*
* This function initializes an AGC instance.
*
* Input:
* - agcInst : AGC instance.
* - minLevel : Minimum possible mic level
* - maxLevel : Maximum possible mic level
* - agcMode : 0 - Unchanged
* : 1 - Adaptive Analog Automatic Gain Control -3dBOv
* : 2 - Adaptive Digital Automatic Gain Control -3dBOv
* : 3 - Fixed Digital Gain 0dB
* - fs : Sampling frequency
*
* Return value : 0 - Ok
* -1 - Error
*/
int WebRtcAgc_Init(void *agcInst,
WebRtc_Word32 minLevel,
WebRtc_Word32 maxLevel,
WebRtc_Word16 agcMode,
WebRtc_UWord32 fs);
#if defined(__cplusplus)
}
#endif
#endif // WEBRTC_MODULES_AUDIO_PROCESSING_AGC_INCLUDE_GAIN_CONTROL_H_